Missions
Epiq’s low SWaP-C processing solutions have proven crucial to hundreds of missions over more than a decade. Whether it’s defense, space, or commercial use, our SDRs are designed to deliver maximum performance with minimal size, weight and power.
ATTRITABLE
ATTRITABLE
Attritable platforms are an emerging trend, focusing on the development and deployment of extremely low SWaP and cost-effective unmanned systems. Attritable RF payloads can support communications, signal detection/classification, direction finding, and RF denial of service techniques. Instead of traditional, high-value asset deployment, attritable and expendable platforms are single-use, deployed with a “launch and forget” mindset. Epiq supports these deployments with SDRs smaller than a gum stick.
ENABLING SMALL PAYLOADS
Epiq’s tiny and extremely low power SDRs can enable cost sensitive, high volume attritable applications such as UxS swarms.
AI / ML AT THE EDGE
Epiq's G40 and X40 SDRs integrate with DeepSig's OmniSig DF software package to provide signal detection and direction finding using machine learning techniques.
Related products
SIDEKIQ™ Z2
Introducing Sidekiq™ Z2: the world's smallest wideband RF transceiver combined with a Linux computer. No more wasting time integrating the hardware: just bring your application, power source, and antenna.
Matchstiq™ G20 and G40
The Matchstiq™ G20 and G40 are highly flexible RF and signal processing SDR platforms, ready to enable applications with the most challenging SWaP-C requirements. Both the Matchstiq™ G20 and G40 have Epiq's flagship SDR, Sidekiq™ NV100, as a fundamental component.
SIDEKIQ™ NV100
Sidekiq NV100 is a low-SWaP RF powerhouse combining state-of-the-art wideband RF processing capabilities with an integrated GPS clock and flexible Rx pre-select filtering, all in a common form factor.
EPIQ PRODUCTS IN ACTION
CASE STUDY
Lorem ipsum dolor sit lorem ipsum dolor sit
Andouille doner tail hamburger venison, sirloin bacon pork chop strip steak drumstick tongue rump. Ball tip landjaeger jowl shank. Andouille doner tail hamburger venison, sirloin bacon pork chop strip steak drumstick tongue rump. Ball tip landjaeger jowl shank.
READ case studyPAYLOAD
PAYLOAD
Airborne payloads allow for RF customization of an airframe for an application-specific RF mission. There are a range of payload specifications: AgilePod, Modular (Mod) Payload, and SOSA aligned 3U VPX and emerging VNX+ chassis-based payloads, and small airframes often require a custom, non standardized payload architecture. Epiq’s small form factor, SOSA aligned, and mod payload SDRs enable a wide range of airframes to meet their RF requirements.
MOD PAYLOAD
In addition to Epiq's internal mod payload SDRs, Epiq's small form factor SDRs have also been embedded and deployed in 3rd party mod payload form factor products.
OPEN ARCHITECTURE
Epiq’s 3U VPX open architecture SDRs and RF tuners can be easily integrated into SOSA aligned payloads for rapid development and deployment.
Related products
Matchstiq™ G20 and G40
The Matchstiq™ G20 and G40 are highly flexible RF and signal processing SDR platforms, ready to enable applications with the most challenging SWaP-C requirements. Both the Matchstiq™ G20 and G40 have Epiq's flagship SDR, Sidekiq™ NV100, as a fundamental component.
Sidekiq™ VPX400
The Sidekiq™ VPX400 is a SOSA aligned 3U VPX transceiver module that integrates the Sidekiq™ X4 with an FPGA carrier to provide a complete SDR platform. Accelerate your prototyping and deployment with this modular, open-architecture SDR.
Sidekiq™ VPX410
The Sidekiq™ VPX410 pushes RF coverage to greater limits in the 3U VPX form factor. With four high-performance integrated receivers and a single transmitter, all providing RF access up to 18GHz onto an IF frequency of 3GHz, the VPX410 is an unmatched SOSA-aligned 3U VPX tuner.
NDR364
Introducing our 4-channel super-heterodyne downconverter, which covers RF signals from 20 MHz to 6 GHz. The NDR364 includes a built-in GPS receiver and accepts a 1PPS input to support precision timing applications.
NDR325
The NDR325 is a software defined payload packaged in a Modular Payload (Mod Payload) Design Standard, Rev. 5.0 compliant 1U form factor. It includes a 4-channel, superheterodyne tuner that covers RF signals from 20 MHz to 6 GHz, and each channel provides a 500 MHz instantaneous bandwidth
EPIQ PRODUCTS IN ACTION
CASE STUDY
How TSC Adapted Epiq’s Matchstiq™ Z3u for an RF-Integrated MOD Payload
Explore how Epiq’s Matchstiq™ Z3u enabled SDR-based Mod Payload for deploying advanced SIGINT and A-PNT applications. Read the case study to learn more about our collaboration with TSC, a high-tech engineering firm serving the U.S. Government, which resulted in a cutting-edge RF Mod Payload solution for USSOCOM.
READ case studyOPEN ARCHITECTURE
OPEN ARCHITECTURE
SOSA and CMOSS are decreasing cost, expanding innovation, and encouraging competition. With the ability to mix and match top hardware and software providers, system integrators can rapidly create and deploy new technology capabilities. Form factors like 3U VPX and VNX+ allow for the open architecture approach to scale to smaller platforms and deployment domains. Epiq has a wide range of SOSA aligned SDRs and RF tuners, ranging from low SWaP to industry leading RF performance.
MORA SUPPORT
Epiq has been an active member of the SOSA (Sensor Open Systems Architecture) consortium since 2019, and provides MORA 2.5 support for its SOSA-aligned 3U VPX SDRs. Our solutions use modular designs and come widely supported, designed to reduce development time and simplify integration.
VITA49 AND OPEN APIs
To simplify SDR integration and development, we offer open APIs. Smaller SDR modules (like our MiniPCIe, M.2, and FMC form factor cards) designed for integration into a host system use our libsidekiq API, while other box level solutions (like NV800) use VITA49 with a separate command/control API.
Related products
SIDEKIQ™ VPX400
The Sidekiq VPX400 is a modular, multi-channel RF transceiver that enables rapid development while reducing system slot count requirements and power consumption.
SIDEKIQ™ VPX410
The Sidekiq™ VPX410 pushes RF coverage to greater limits in the 3U VPX form factor. With four high-performance integrated receivers and a single transmitter, all providing RF access up to 18GHz onto an IF frequency of 3GHz, the VPX410 is an unmatched SOSA-aligned 3U VPX tuner.
SIDEKIQ™ X4
The Sidekiq™ X4 is designed for SDR systems that demand performance and synchronization. Featuring four high-performance, wideband receivers and transmitters in the VITA 57.1 form factor, the X4 brings multi-channel phase-coherent SDR capability to a wide range of host platforms.
NDR664
The NDR664 is a 4-channel, 3U SOSA-aligned microwave transceiver that provides frequency coverage from 20 MHz to 18 GHz. Its industry-leading channel density minimizes system-level SWaP. Each channel provides a 1 GHz analog IF output with a 500 MHz instantaneous bandwidth.
NDR585
Introducing our 4-channel SOSA-aligned 3U VPX Microwave Platform that covers RF signals from 20 MHz to 18 GHz. It is a rugged conduction-cooled 3U VPX module, per VITA 46/48/65/67. The NDR585’s industry-leading channel density minimizes system-level SWaP.
NDR374
Introducing our 4-channel, 3U SOSA 3U VPX SDR that covers RF signals from 2 MHz to 8 GHz. It is a rugged conduction-cooled 3U VPX module, per VITA 46/48/65/67. The VPX module supports both independent and phase coherent tuning, and two units can support 8-channel
coherent operation.
EPIQ PRODUCTS IN ACTION
Case Study
An Introduction to SOSA
The SOSA Technical Standard defines a reference architecture that aligns with many of the industry's existing standards, such as VITA's OpenVPX. By using these existing standards, prior work can be leveraged and SOSA then picks applicable parts to use.
READ case studyMORE RELATED CONTENT
blogs
The Sidekiq VPX410 Enables Signals of Interest in X & Ku Bands
Many traditional wireless signals of interest exist below 6GHz: GPS, 3G/4G, legacy WiFi, L-band and S-band SATCOM, radar, and many more.
blogs
Epiq Solutions VPX400 Demonstrates MORA 2.4 Compliance
To enable more rapid deployment of new technology, and introduce the ability to mix and match the best hardware from a range of potential vendors...
application notes
UxS Payload Form Factors
Customers often ask us for something that can fit into a particular form factor. Here’s how we achieve that.
white papers
Building and Verifying SOSA-Aligned Phase Coherent RF Systems with Sidekiq X4
A major US Department of Defense (DoD) organization was concerned about the growing threat of eavesdropping on classified discussions happening within DoD facilities.
EPIQ PRODUCTS IN ACTION
CASE STUDY
An Introduction to SOSA
The SOSA Technical Standard defines a reference architecture that aligns with many of the industry's existing standards, such as VITA's OpenVPX. By using these existing standards, prior work can be leveraged and SOSA then picks applicable parts to use.
READ case studyEMBEDDED AND SMALL
FORM FACTOR
EMBEDDED AND SMALL
FORM FACTOR
Utilizing standards-compliant form factors such as MiniPCIe, M.2, and FPGA Mezzanine Card (FMC) to provide SDR functionality enables rapid integration and development of a complete RF processing system. By combining an embedded SDR with a COTS embedded compute platform such as an NVIDIA® Jetson Orin™ NX or Raspberry Pi, customers can demonstrate and field prototype RF solutions faster than ever.
CUSTOMIZABLE PLATFORMS
SDR platforms like Epiq’s Matchstiq G40 combine two Sidekiq NV100 SDRs (each in an M.2 2280 card form factor) with an Nvidia Orin NX CPU/GPU module. One SDR can be replaced with an M.2 2280 SSD to enable RF recording and playback applications.
LOWEST SWaP ON THE MARKET
Embedded small form factor SDRs, such as Sidekiq Z2, take COTS SDR system integration further than ever. We combined a complete 1x1 RF transceiver and Linux computer on a card measuring just 30mm x 51mm x 5mm: creating the smallest commercially available SDR processing system.
Related products
SIDEKIQ™ NV100
Sidekiq NV100 is a low-SWaP RF powerhouse combining state-of-the-art wideband RF processing capabilities with an integrated GPS clock and flexible Rx pre-select filtering, all in a common form factor.
SIDEKIQ™ Z2
Introducing Sidekiq™ Z2: the world's smallest wideband RF transceiver combined with a Linux computer. No more wasting time integrating the hardware: just bring your application, power source, and antenna.
SIDEKIQ™ M.2
Designed to be easily integrated into M.2 card-based systems, this SDR family is a breakthrough small form-factor solution. Featuring Analog Devices AD9361 wideband transceiver, they support a tuning range of 70 MHz to 6 GHz and programmable logic, which means they can transform countless host devices into RF processing powerhouses.
EPIQ PRODUCTS IN ACTION
CASE STUDY
Building Blocks that Deliver Small yet Flexible Radio Solutions in Record Time
Using Sidekiq™ modules to create Flying Fox Enterprise®, a robust RF-sensing solution, we unlocked a new way to safeguard facilities from unauthorized wireless devices, allow for swift removal of threats, and boost first-line defence.
READ case studyMANPACK & DISMOUNT
MANPACK & DISMOUNT
“Every soldier as a sensor” has been a theme in the DoD for years. Now that SDR technology can integrate flexible RF transceivers with embedded computers and high-capacity batteries, it’s possible to field an array of capabilities in manpack, handheld, and bodyworn deployment scenarios. Open architecture SDRs like our 3U VPX SOSA-aligned VPX400 work well for manpack deployments, with more integrated SDRs such as our Matchstiq X40 for handheld and bodyworn systems.
INTEGRATED SOLUTIONS
Matchstiq X40 is a multi-channel SDR transceiver supporting RF access up to 18 GHz, with an embedded NVIDIA® Jetson Orin™ NX CPU/GPU for advanced signal processing and AI/ML applications. Epiq’s Matchstiq Z3u is even smaller (the size of a deck of cards) and can mount to a tablet or mobile phone.
MODULAR OPEN ARCHITECTURE APPROACH
For systems where modularity is of value, Epiq’s SOSA-aligned 3U VPX portfolio offers a range of SDR card options for manpack deployments. For smaller handheld and bodyworn systems, Epiq’s Sidekiq NV100 and Z2 provide the highest levels of integration in standards compliant form factors to simplify integration.
Related products
SIDEKIQ™ NV100
Sidekiq NV100 is a low-SWaP RF powerhouse combining state-of-the-art wideband RF processing capabilities with an integrated GPS clock and flexible Rx pre-select filtering, all in a common form factor.
Matchstiq™ G20 and G40
The Matchstiq™ G20 and G40 are highly flexible RF and signal processing SDR platforms, ready to enable applications with the most challenging SWaP-C requirements. Both the Matchstiq™ G20 and G40 have Epiq's flagship SDR, Sidekiq™ NV100, as a fundamental component.
Matchstiq™ Z3u
The Matchstiq™ Z series offer portable, easily integrated SDR capability that fits in the palm of your hand. Based on the AD9361 RF transceiver, these SDRs provide 6GHz of RF access and integrated signal processing in a low SWaP form factor.
EPIQ PRODUCTS IN ACTION
CASE STUDY
Lorem ipsum dolor sit lorem ipsum dolor sit
Andouille doner tail hamburger venison, sirloin bacon pork chop strip steak drumstick tongue rump. Ball tip landjaeger jowl shank. Andouille doner tail hamburger venison, sirloin bacon pork chop strip steak drumstick tongue rump. Ball tip landjaeger jowl shank.
READ case studySPACE
SPACE
Satellite buses, payloads, rockets, landers, rovers, robotics, and space stations all have imbedded Xiphos processing. For 20+ years, we’ve been delivering 1,000+ low SWaP-C COTS-based space processors.
Over 8 generations of products, we’ve learned to maximize reliability and radiation tolerance while increasing processing capability and reducing power consumption, size and cost. We went through the pain so you don’t have to.
We specialize in very small cards, but don’t let the size fool you: these are some of the most powerful processors available.
SPACE HERITAGE
Combining Epiq's decade-long heritage in serving government-focused industries with Xiphos’ two decades of experience in space technology, we offer an unmatched depth of expertise that you can fully rely on for your space mission.
COMMERCIAL TECHNOLOGY
Applications requiring high performance processing and reasonable cost need COTS-based solutions. SWaP constrained payloads and platforms have been leading COTS adoption. Xiphos is a world leader in packaging, low SWaP, robust, COTS-based solutions.
Related products
Xiphos Q8RF
The Q8 builds on the small, efficient design of other Xiphos Q-Cards but adds record-breaking performance capabilities, taking processing power farther than ever before.
Xiphos Q8/q8j
The Xiphos Q8 is an extremely high-performance Processor Board based on the Xilinx Zynq UltraScale+. It is ideal for demanding space applications that require high processing power, flexibility, and low power consumption.
Xiphos Q7
Upholding the small form, minimal weight, and conservative power usage of its predecessors while boasting solid multiprocessor CPU performance, our Q7 is a hybrid environment of powerful CPUs and reprogrammable logic that will get the job done.
EPIQ PRODUCTS IN ACTION
module
Enhancing Geospatial Intelligence
When HawkEye 360, a leader in geospatial intelligence, embarked on an innovative project to enhance its satellite payload capabilities, they turned to the Q7 and Q8 card processors to not only withstand the harsh realities of space, but also deliver exceptional performance.